HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 157
HP StorageWorks 64 - SAN Director Switch Manual
View all HP StorageWorks 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
NOTE: This is a Fibre Channel only statistic. McDATA SNMP Support 2 FcConnUnitPortStatCountLossofSynchronization Type Counter64 Product Mapping stSyncLosses (Only supports low 32 bits of counter, high 32 bits are set to zero). Access R Description Number of instances of synchronization loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). NOTE: This is a Fibre Channel only statistic. FcConnUnitPortStatCountInvalidOrderedSets Type Counter64 Product Mapping Not supported. Access R Description Number of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). NOTE: This is a Fibre Channel only statistic. FcConnUnitPortStatCountFramesTooLong Type Counter64 Product Mapping Not supported. Access R Description Number of frames received at this port where the frame length was greater than what was agreed to in FLOGI/PLOGI. This could be caused by losing the end of frame delimiter. NOTE: This is a Fibre Channel only statistic. Fibre Alliance MIB 2-139