HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 302
Syntax, Access, Status, Description, Sequence
![]() |
View all HP StorageWorks 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 302 highlights
FC Management MIB B connUnitPortStatCountClass1PBSYFrames Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description Count of times that PBSY was returned to this port as a result of a Class 1 Frame that could not be delivered to the other end of the link. This occurs if the destination N_Port is temporarily busy. PBSY can only occur on SOFc1 frames (the frames that establish a connection). Note, this is a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 17 } connUnitPortStatCountClass1FRJTFrames Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description Count of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected by the fabric. Note, this is a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 18 } connUnitPortStatCountClass1PRJTFrames Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description Count of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected at the destination N_Port. Note, this is a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 19 } connUnitPortStatCountClass2RxFrames Syntax OCTET STRING (SIZE (8)) Access read-only B-58 E/OS SNMP Support Manual
![](/manual_guide/products/hewlettpackard-316095b21-fw-070000hafm-sw-080600-mcdata-eos-snmp-support-manual-620000131620-2005-e90560b/302.png)