HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 418

MIB II E ipRouteType Syntax Access Status Description Sequence INTEGER { other(1), -- none of the following invalid(2), -- an invalidated route -- route to directly direct(3), -- connected (sub-)network route to a non-local indirect(4) -- host/network/sub-network } read-write mandatory The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object. ::= { ipRouteEntry 8 } ipRouteProto Syntax INTEGER { other(1), -- none of the following non-protocol information, e.g., manually configured local(2), -- entries set via a network netmgmt(3), -- management protocol obtained via ICMP, icmp(4), -- e.g., Redirect the remaining values are all gateway routing protocols egp(5), ggp(6), E-28 E/OS SNMP Support Manual