HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 95

McDATA SNMP Support 2 Access Description R/W The desired state of the Fx_Port. A management station may place the Fx_Port in a desired state by setting this object accordingly. The testing(3) state indicates that no operational frames can be passed. When a Fabric Element initializes, all Fx_Port start with fcFxPortPhysAdminStatus in the offline(2) state. As the result of either explicit management action or per configuration information accessible by the Fabric Element, fcFxPortPhysAdminStatus is then changed to either the online(1) or testing(3) states, or remains in the offline state. The values are defined as follow: online(1) - place port online, offline(2) - take port offline, testing (3). If the port cannot be set to testing because it is inactive or in a failed state, the return value will be resource_unavailable(13). FcFxPortPhysOperStatus Type Provided By Access Description INTEGER FPM, SNMP R The current operational status of the Fx_Port. The testing(3) status indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline(2) then fcFxPortPhysOperStatus should be offline(2). If fcFxPortPhysAdminStatus is changed to online(1) then fcFxPortPhysOperStatus should change to online(1) if the Fx_Port is ready to accept Fabric Login request from the attached NxPort; it should proceed and remain in the link-failure(4) state if and only if there is a fault that prevents it from going to the online(1) state. The values are defined as online(1) - Login may proceed, offline(2) - Login cannot proceed, testing(3) - port is under test, link-failure(4) - failure after online/testing. FcFxPortPhysLastChange Type TimeTicks Provided By SNMP Access R Fabric Element Management MIB 2-77