HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 197
fcConnUnitPortControl, resetConnUnitPort 3, bypassConnUnitPort 4, Syntax, Max-Access, Status
View all HP StorageWorks 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Fibre Alliance MIB A fcConnUnitPortControl Syntax Max-Access Status Description INTEGER { unknown (1), invalid (2), esetConnUnitPort (3), ypassConnUnitPort (4), nbypassConnUnitPort (5), fflineConnUnitPort (6), nlineConnUnitPort (7) } read-write current This object is used to control the addressed fcConnUnit's port. Valid commands are: unknown and invalid are only used as values that are read. resetConnUnitPort (3): If the addressed connectivity unit allows this operation to be performed on this port, the addressed port performs a vendor-specific 'reset' operation. Examples of these operations are: the Link Reset protocol, the Loop Initialization protocol, or a resynchronization occurring between the transceiver in the addressed port to the transceiver that the port is connected to. bypassConnUnitPort (4): If the addressed connectivity unit allows this operation to be performed to this port, the addressed port performs a vendor-specific 'bypass' operation. Examples of these operations are: transitioning from online to offline, a request (NON-PARTICIPATING) command to the Loop Port state machine, or removal of the port from an arbitrated loop by a hub. unbypassConnUnitPort (5): If the addressed connectivity unit allows this operation to be performed to this port, the addressed port performs a vendor-specific 'unbypass' operation. Examples of these operations are: the Link Failure protocol, a request (PARTICIPATING) command to the Loop Port state machine, or addition of the port to an arbitrated loop by a hub. FA MIB A-31