HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 383

SNMP Framework MIB D octets. If multiple methods are defined, then it is recommended that the first octet indicate the method being used and the remaining octets be a function of the method. 3. 3) The length of the octet strings varies. The first four octets are set to the binary equivalent of the agent's SNMP management private enterprise number as assigned by the Internet Assigned Numbers Authority (IANA). For example, if Acme Networks has been assigned { enterprises 696 }, the first four octets would be assigned '000002b8'H. The very first bit is set to 1. For example, the above value for Acme Networks now changes to be '800002b8'H. The fifth octet indicates how the rest (6th and following octets) are formatted. The values for the fifth octet are: 0 reserved, unused. 1 IPv4 address (4 octets) lowest non-special IP address. 2 IPv6 address (16 octets) lowest non-special IP address. 3 MAC address (6 octets) lowest IEEE MAC address, canonical order. 4 Text, administratively assigned Maximum remaining length 27. 5 Octets, administratively assigned. Maximum remaining length 27. 6-127 reserved, unused. 127-255 as defined by the enterprise. Maximum remaining length 27. SnmpSecurityModel Syntax Status Description OCTET STRING (SIZE(1..32)) current An identifier that uniquely identifies a securityModel of the Security Subsystem within the SNMP Management Architecture. The values for securityModel are allocated as follows: • The zero value is reserved. • Values between 1 and 255, inclusive, are reserved for standards-track Security Models and are managed by the Internet Assigned Numbers Authority (IANA). SNMP Framework MIB D-3