HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 141

McDATA SNMP Support 2 NOTE: (for E/OS firmware): A reset or firmware load will cause this table to be regenerated from the persistent login database - table indices will most likely be associated with different entries after the reset. *fcConnUnitLinkIndex Type Product Mapping Access Description Unsigned32 A link index. R This value is used to create a unique value for each entry in the link table with the same fcConnUnitId. The value can only be reused if it is not currently in use and the value is the next candidate to be used. This value is allowed to wrap at the highest value represented by the number of bits. This value is reset to zero when the system is reset and the first value to be used is 1. FcConnUnitLinkNodeIdX Type OCTET STRING (SIZE(16)) Product Mapping The WWN of the local fcConnUnit is returned. This information is available for both E and F ports Access R Description The node WWN of the unit at one end of the link. If the node WWN is unknown and the node is a fcConnUnit in the responding agent then the value of this object MUST BE equal to its fcConnUnitId. FcConnUnitLinkPortNumberX Type Integer32 Product Mapping The fcConnUnit's local port number is returned. This information is available for both E and F ports. Access R Description The port number on the unit specified by fcConnUnitLinkNodeIdX if known, otherwise -1. If the value is non-negative then it will be equal to fcConnUnitPortPhysicalNumber. Fibre Alliance MIB 2-123