HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 136

McDATA SNMP Support 2 Access Description F_Port 2 = Fabric(2) FL_Port 1 = Loop(1) E_Port 2 = Fabric(2) H_Port 1 = Loop(1) B_Port 2 = Fabric(2) R Bit mask that specifies the driver level protocol(s) that are currently operational. If this is not applicable, return all bits set to zero. This object has the same definition as fcConnUnitPortProtocolCap. FcConnUnitPortNodeWwn (added from Mib3.0) Type FcNameId Product Mapping switch WWN Access R Description The Node World Wide Name of the port if applicable, otherwise all zeros. This should have the same value for a group of related ports. The container is defined as the largest physical entity. For example, all ports on HBAs on a host will have the same Node WWN. All ports on the same storage subsystem will have the same Node WWN. FcConnUnitPortHWState (added from Mib3.0) Type INTEGER Product Mapping Access R Description The hardware detected state of the port. The values are defined as follow: unknown (1) failed (2) bypassed (3) port failed diagnostics FCAL bypass loop only, 2-118 E/OS SNMP Support Manual