HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 22

McDATA SNMP Support 2 Error status-Indicates one of a number of errors and error types. Only the response operation sets this field. Other operations set this field to zero. Error index-Associates an error with a particular object instance. Only the response operation sets this field. Other operations set this field to zero. Variable bindings-Serves as the data field of the SNMPv2 PDU. Each variable binding associates a particular object instance with its current value (with the exception of Get and GetNext requests, for which the value is ignored). Get, GetNext, Inform, Response, Set, and Trap PDUs Contain the Same Fields: [PDU type | Request ID | Error status | Error index | Object/Value 1 | Object/Value 2] For the SNMPv2 trap pdu, the first and second variable bindings contain the uptime and the trap OID respectively. Following the uptime and trap OID are all the variable bindings specified in the MIB for that particular trap. E/OS Trap summary table This table shows the different kinds of traps supported by the switch E/OS firmware. All E/OS traps are SNMPv1 format, regardless of MIB definition syntax.) Trap Generic Authentication Failure Generic Link Up Generic Warm Start Generic Cold Start ES port change Severity Sent because N/A SNMP request from an invalid community is received N/A N/A Software reset N/A Power up N/A A change in port status MIB RFC-1157 RFC-1157 RFC-1157 RFC-1157 FCEOS Trap OID 1.3.6.1.4.1.289.1 E/OS YES EFCM YES YES NO YES NO YES NO YES NO 2-4 E/OS SNMP Support Manual