HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 298

FC Management MIB B Description Sequence A count of the errors that have occurred on this port. ::= { connUnitPortStatEntry 3 } connUnitPortStatCountTxObjects Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description The number of frames/packets/IOs/etc. that have been transmitted by this port. Note: A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices should not count frames passed through. This value represents the sum total for all other Tx objects. Sequence ::= { connUnitPortStatEntry 4 } connUnitPortStatCountRxObjects Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description The number of frames/packets/IOs/etc. that have been received by this port. Note: A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices should not count frames passed through. This value represents the sum total for all other Rx objects. Sequence ::= { connUnitPortStatEntry 5 } connUnitPortStatCountTxElements Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description The number of octets or bytes that have been transmitted by this port. One second periodic polling of the port. This value is saved and compared with the next polled value to compute net throughput. Note, for Fibre Channel, ordered sets are not included in the count. Sequence ::= { connUnitPortStatEntry 6 } B-54 E/OS SNMP Support Manual