HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 319

FC Management MIB B trapRegPort Syntax Access Status Description Sequence INTEGER (1..2147483647) read-only mandatory The UDP port to send traps to for this host. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table. ::= { trapRegEntry 2 } trapRegFilter Syntax Access Status Description Sequence FcEventSeverity read-write mandatory This value defines the trap severity filter for this trap host. The connUnit will send traps to this host that have a severity level less than or equal to this value. The default value of this object is 'warning'. ::= { trapRegEntry 3} trapRegRowState Syntax Access Status Description INTEGER { rowDestroy(1), rowInactive(2), rowActive(3) Remove row from table. Row exists, but TRAPs disabled Row exists and is enabled for sending traps } read-write mandatory Specifies the state of the row. rowDestroy READ: Can never happen. WRITE: Remove this row from the table. SNMP Trap Registration Group B-75