HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 224
the Link Error Status Block LESB. FC-PH 29.8. Note, this is a Fibre
![]() |
View all HP StorageWorks 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
Fibre Alliance MIB A Description Sequence Count of instances of synchronization loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat. ::= { fcConnUnitPortStatEntry 43 } fcConnUnitPortStatInvOrderedSets Syntax Counter64 Max-Access read-only Status current Description Count of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat. Sequence ::= { fcConnUnitPortStatEntry 44 } fcConnUnitPortStatFramesTooLong Syntax Counter64 Max-Access read-only Status current Description Count of frames received at this port where the frame length was greater than what was agreed to in FLOGI/PLOGI. This could be caused by losing the end of frame delimiter. Note, this is a Fibre Channel only stat. Sequence ::= { fcConnUnitPortStatEntry 45 } fcConnUnitPortStatFramesTooShort Syntax Counter64 Max-Access read-only Status current Description Count of frames received at this port where the frame length was less than the minimum indicated by the frame header - normally 24 bytes, but it could be more if the DFCTL field indicates an optional header should have been present. Note, this is a Fibre Channel only stat. Sequence ::= { fcConnUnitPortStatEntry 46 } A-58 E/OS SNMP Support Manual
![](/manual_guide/products/hewlettpackard-316095b21-fw-070000hafm-sw-080600-mcdata-eos-snmp-support-manual-620000131620-2005-e90560b/224.png)