HP Surestore 64 fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 100
Node List View, Node List View, Fibre Channel address.
![]() |
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Monitoring and Managing the Director Node List View Display the Node List View in the View panel by choosing Node List from the view tabs. This view displays information about all node attachments to any F_Ports on the director sorted by port number. All data is dynamic and updates automatically as devices log in and log out. Figure 28: Node List View Information that displays for each node includes: ■ Port #-The physical port number, from 0-63 on the Director 2/64, and 0-127 and 132-143 on the Director 2/140. Note that for the Director 2/140, ports 128-131 are internal ports and not available for external connections. ■ Addr-For FICON management style, displays the logical port address (port number plus 4). For Open Systems management style, displays the node's Fibre Channel address. ■ Unit Type-The following information, if supported, is supplied by the attached device: - Converter - Channel path ##, where ## will be replaced with the Channel Path Identifier (2 hex digits) - Communications controller - Converter - Direct access storage - Gateway - HBA 100 Director Product Manager User Guide
![](/manual_guide/products/hewlettpackard-surestore-64-fw-050100-sw-070100-director-product-manager-user-guide-dda62f6/100.png)