HP Surestore 64 fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 151
New Threshold Alerts dialog box-third screen, step 8,
![]() |
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Configuring the Director 7. Enter the amount of cumulative minutes in which the % utilization should exist during the notification interval before an alert is generated. You can also choose At any time if you want an alert to occur whenever the set % utilization is reached. The valid range is from 1 to the interval value set in step 8. 8. Enter the interval in minutes in which throughput is measured and threshold notifications can occur. The valid range is 5 minutes to 70,560 minutes. 9. Click Next. A new screen displays for selecting ports for the alerts, as shown in Figure 48. Figure 48: New Threshold Alerts dialog box-third screen 10. Choose either Port Type or Port List. ■ For Port Type, choose either E_Ports or F_Ports will cause this alert to generate for all ports configured as E_Ports or F_Ports respectively. ■ For Port List, you can choose individual ports when you click the check box by each port number or set all ports. Choosing Set All Ports places a check mark by each port number. Choosing Clear All Ports will clear the check marks by each port number. 11. Click Next. A final screen displays to provide a summary of your alert configuration, as shown in Figure 49. Director Product Manager User Guide 151
![](/manual_guide/products/hewlettpackard-surestore-64-fw-050100-sw-070100-director-product-manager-user-guide-dda62f6/151.png)