HP Xw460c Hardware and Software Supported by HP ProLiant Blade Workstations - - Page 12

3-2 Interconnect bay mapping for the c7000 enclosure Figure 3-1 shows the numbering of the interconnect bays for the c7000 enclosure. The next two sections describe the mapping between the interconnect bays and the xw460c and xw2x220c blade workstations. Figure 3-1 c7000 enclosure interconnect bay numbering 3-2-1 xw460c blade workstation network connections Table 3-2 shows the network connections between the xw460c blade workstation and the interconnect bays. The embedded NICs (NIC 1 and NIC 2) are connected to interconnect bays 1 and 2, respectively. If a network card is installed in the Mezzanine 1 connector, the network card signals are routed to interconnect bays 3 and 4. Table 3-2 xw460c blade workstation network connections Blade workstation signal NIC 1 (Embedded) NIC 2 (Embedded) Mezzanine 1 network card, signal 1 Mezzanine 1 network card, signal 2 Interconnect bay 1 2 3 4 5 and 6 7 and 8 Interconnect bay labels Comment No signals from the xw460c blade workstation connect to interconnect bays 5 and 6. No signals from the xw460c blade workstation connect to interconnect bays 7 and 8. Hardware supported with the blade workstations 12