HP dx2700 Service Reference Guide: HP Compaq dx2700 MT/dx2708 MT/dx2700 SFF Bu - Page 58
Installing an Optional Optical Drive - SFF chassis, Remove the optical drive if present.
View all HP dx2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Removal and Replacement Procedures- Microtower (MT)/Small Form Factor (SFF) Chassis 7. Remove the screws 1 that secure Floppy drive and Optical drive. Removing the Optical Drive or Diskette Drive To replace the drive, reverse the removal procedures. ✎ When replacing the drive, transfer the four screws from the old drive to the new one. The screws take the place of drive rails. 6.8.5 Installing an Optional Optical Drive - SFF chassis To install an optional optical drive: 1. Remove the optical drive if present. 2. Install the guide screws as indicated. Ä CAUTION: Use only 3/16-inch or 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive. Service Reference Guide 431672-001 6-21
Service Reference Guide
431672-001
6–21
Removal and Replacement Procedures— Microtower (MT)/Small Form Factor (SFF) Chassis
7. Remove the
screws
1
that secure Floppy drive and Optical drive.
Removing the Optical Drive or Diskette Drive
To replace the drive, reverse the removal procedures.
✎
When replacing the drive, transfer the four screws from the old drive to the new one. The screws
take the place of drive rails.
6.8.5 Installing an Optional Optical Drive - SFF chassis
To install an optional optical drive:
1. Remove the optical drive if present.
2. Install the guide screws as indicated.
Ä
CAUTION:
Use only 3/16-inch or 5-mm long screws as guide screws. Longer screws can damage the
internal components of the drive.