HP dx2700 Service Reference Guide: HP Compaq dx2700 MT/dx2708 MT/dx2700 SFF Bu - Page 64
System Fan, Remove the four screws that secure the fan to the chassis and remove the fan.
View all HP dx2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Removal and Replacement Procedures- Microtower (MT)/Small Form Factor (SFF) Chassis 6.10 System Fan 1. Prepare the computer for disassembly (Section 6.1, "Preparation for Disassembly"). 2. Remove the access panel (Section 6.2, "Remove the computer access panel and front bezel (MT chassis and SFF chassis)"). 3. Disconnect the cable that connects the system fan to the system board. 4. Remove the four screws that secure the fan to the chassis and remove the fan. To install the fan, reverse the removal procedures. Note: Similar installtion procedure is lying on SFF for System Fan. Service Reference Guide 431672-001 6-27
Service Reference Guide
431672-001
6–27
Removal and Replacement Procedures— Microtower (MT)/Small Form Factor (SFF) Chassis
6.10 System Fan
1. Prepare the computer for disassembly (
Section 6.1, “Preparation for Disassembly”
).
2. Remove the access panel (
Section 6.2, “Remove the computer access panel and front bezel
(MT chassis and SFF chassis)”
).
3. Disconnect the cable that connects the system fan to the system board.
4. Remove the four screws that secure the fan to the chassis and remove the fan.
To install the fan, reverse the removal procedures.
Note: Similar installtion procedure is lying on SFF for System Fan.