Hitachi IC25N040ATCS04-0 Specifications - Page 116
Data Out commands
UPC - 683728198664
View all Hitachi IC25N040ATCS04-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
12.2 Data Out commands The following are Data Out commands: ! Device Configuration SET ! Format Track ! Security Disable Password ! Security Erase Unit ! Security Set Password ! Security Unlock ! Set Max SET PASSWORD ! Set Max UNLOCK ! S.M.A.R.T. Write log sector ! Write Buffer ! Write Long ! Write Multiple ! Write Sectors ! Write Verify Execution includes the transfer of one or more 512 byte (> 512 bytes on Write Long) sectors of data from the host to the device. 1. The host writes any required parameters to the Features, Sector Count, Sector Number, Cylinder, and Device/Head Registers. 2. The host writes the command code to the Command Register. 3. The device sets BSY = 1. 4. For each sector (or block) of data to be transferred: a. The device sets BSY = 0 and DRQ = 1 when it is ready to receive a sector (or block). b. The host writes one sector (or block) of data via the Data Register. c. The device sets BSY = 1 after it has received the sector (or block). d. When the device has finished processing the sector (or block), it sets BSY = 0 and interrupts the host. e. In response to the interrupt, the host reads the Status Register. f. The device clears the interrupt in response to the Status Register being read. 5. For the Write Long command: a. The device sets BSY = 0 and DRQ = 1 when it is ready to receive a sector. b. The host writes one sector of data including ECC bytes via the Data Register. c. The device sets BSY = 1 after it has received the sector. d. After processing the sector of data the device sets BSY = 0 and interrupts the host. e. In response to the interrupt, the host reads the Status Register. f. The device clears the interrupt in response to the Status Register being read. The Write Multiple command transfers one block of data for each interrupt. The other commands transfer one sector of data for each interrupt. If the device detects an invalid parameter, then it will abort the command by setting BSY = 0, ERR = 1, ABT = 1, and interrupting the host. Hitachi Travelstar 60GH & 40GN hard disk drive specifications 103