Hitachi IC25N040ATCS04-0 Specifications - Page 140
READ/WRITE DMA QUEUED command supported
UPC - 683728198664
View all Hitachi IC25N040ATCS04-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Word 86 87 88 89 90 91 92 Content Description 0XXXH Command set/feature enabled * 15-12(=0) Reserved 11(=1) 1=Device Configuration Overlay supported * 10- 9(=0) Reserved 8(=X) 1=SET MAX security extension enabled * 7(=X) 1=Address Offset mode enabled 6(=0) 1=SET FEATURES subcommand required to spin-up 5(=0) 1=Power-Up In Standby feature set has been enabled via the SET FEATURES command 4(=0) 1=Removable Media Status Notification Feature Set enabled 3(=X) 1=Advanced Power management Feature Set enabled 2(=0) 1=CFA Feature Set supported 1(=0) 1=READ/WRITE DMA QUEUED command supported 0(=0) 1=DOWNLOAD MICROCODE command supported 4003H XX3FH XXXXH 0000H 40FEH XXXXH Command set/feature enabled 15(=0) Always 14(=1) Always 13- 2(=0) Reserved 1(=1) 1=SMART self-test supported 0(=1) 1=SMART error logging supported Ultra DMA Transfer mode (mode 5 supported) 15-14(=0) Reserved 13(=X) 1=UltraDMA mode 5 is selected 12(=X) 11(=X) 10(=X) 9(=X) 1=UltraDMA mode 4 is selected 1=UltraDMA mode 3 is selected 1=UltraDMA mode 2 is selected 1=UltraDMA mode 1 is selected 8(=X) 1=UltraDMA mode 0 is selected 7- 6(=0) Reserved **5(=1) **4(=1) **3(=1) **2(=1) 1=UltraDMA mode 5 is selected 1=UltraDMA mode 4 is supported 1=UltraDMA mode 3 is supported 1=UltraDMA mode 2 is supported **1(=1) 1=UltraDMA mode 1 is supported 0(=1) 1=UltraDMA mode 0 is supported Time required for security erase unit completion Time= value (XXXXh)*2 [minutes] Time required for Enhance security erase completion 0000 : Not supported Reserved Current Master Password Revision Codes ** indicates a feature that is able to be unsupported by the Device Configuration Overlay command. Figure 90. Identify device information. (Part 5 of 7) Hitachi Travelstar 60GH & 40GN hard disk drive specifications 127