Hitachi IC25N040ATCS04-0 Specifications - Page 76
Introduction, 2 Terminology - new
UPC - 683728198664
View all Hitachi IC25N040ATCS04-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
8.0 General 8.1 Introduction This specification describes the host interface of the Hitachi Travelstar 60GH & 40GN. The interface conforms to the Working Document of Information technology, AT Attachment with Packet Interface Extension (ATA/ATAPI-5) Revision 3, dated 29 February 2000, with certain limitations described in section 9.0, "Deviations From Standard" on page 65. The drive supports the following new functions included by ATA/ATAPI-5 standards or newer standards: ! Device Configuration Overlay The drive supports the following functions as Vendor Specific Functions: ! Address Offset Feature ! Format Unit Function ! ENABLE/DISABLE DELAYED WRITE ! SENSE CONDITION command 8.2 Terminology Device Host First Command INTRQ The Hitachi Travelstar 60GH & 40GN drive The system to which the device is attached The first command which is executed after the power on reset (also known as a hard reset) is the Standby mode command. Interrupt request (Device or Host) Hitachi Travelstar 60GH & 40GN hard disk drive specifications 63