Hitachi IC25N040ATCS04-0 Specifications - Page 45
Connector and jumper description, 5.4 Mounting orientation - travelstar jumper
UPC - 683728198664
View all Hitachi IC25N040ATCS04-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Figure 27. Mounting hole locations of all models except 60 GB model. 6.5.3 Connector and jumper description A jumper is used to designate the drive address as either master or slave. The jumper setting method is described in section 7.10, "Drive address setting" on page 58. Connector specifications are included in section 7.2, "Interface connector" on page 41. 6.5.4 Mounting orientation The drive will operate in all axes (six directions) and will stay within the specified error rates when tilted ±5 degrees from these positions. Performance and error rate will stay within specification limits if the drive is operated in the other permissible orientations from which it was formatted. Thus a drive formatted in a horizontal orientation will be able to run vertically and vice versa. The recommended mounting screw torque is 3.0±0.5 kgf-cm. The recommended mounting screw depth is 3.0±0.3 mm for bottom and 3.5±0.5 mm for horizontal mounting. Hitachi Travelstar 60GH & 40GN hard disk drive specifications 32