Honeywell VISTAKEY User Guide - Page 13

User Commands (cont'd) Table 1: Action Codes ACTION ACTION NO. NAME ACTION ACTION SPECIFIER DESCRIPTION Relay Commands Activation times 1 (Beginning), 2 (End), 3 (During) are the only valid choices for relay commands. "During" can be used to control the relay for a specific time only. For example, if "during" is selected with Relay On, the system will automatically energize the relay at the beginning of the window and automatically de-energize the relay at the end of the window. 01 Relay On Relay # Relay On - Turn on relay indicated by the specifier 02 Relay Off Relay # Relay Off - Turn off relay indicated by the specifier 03 Rly On 2 Sec Relay # Relay Close for 2 seconds - Close relay indicated by the specifier for 2 seconds 04 Relay xx Min Relay # Relay Close XX minutes - Close relay indicated by the specifier for XX minutes (the XX value was set by the system installer) 05 Relay yy Relay # Relay Close YY seconds - Close relay indicated by specifier for Sec YY seconds (the YY value was set by the system installer) 06 Rly Grp On Relay Group Relay Group On - Turn on relay group indicated by specifier # 07 Rly Grp Off Relay Group Relay Group Off - Turn off relay group indicated by the specifier # 08 Rly Grp 2 Relay Group Relay Group Close for 2 seconds - Close all relays in the group Sec # indicated by the specifier for 2 seconds 09 Rly Grp xx Relay Group Relay Group Close XX minutes - Close relay group indicated by Min # the specifier for XX minutes (the XX value was set by the system installer) 10 Rly Grp yy Relay Group Relay Group Close YY seconds - Close relay group indicated by Sec # the specifier for YY seconds (the YY value was set by the system installer) Arm/Disarm Commands Activation times 1 (Beginning), 2 (End), 3 (During) are the only valid choices for automatic arming and disarming functions. "During" can be used to arm or disarm the control for a specific time only. For example, if "during" is selected with ArmSTAY, the system will automatically Arm-STAY at the beginning of the window and automatically disarm at the end of the window. 20 Arm STAY Partition(s) Arm STAY - Arm the partition(s) indicated by the specifier in the STAY mode 21 Arm AWAY Partition(s) Arm AWAY - Arm the partition(s) indicated by the specifier in the AWAY mode 22 Disarm Partition(s) Disarm - Disarm the partition(s) indicated by the specifier 23 Force Arm Partition(s) Force Arm STAY - Force arm the partition(s) indicated by STAY specifier in the STAY mode (Auto-bypass faulted zones) 24 Force Arm Partition(s) Force Arm AWAY - Force arm the partition(s) indicated by the AWAY specifier in the AWAY mode (auto-bypass faulted zones) - 13 -