Honeywell VISTAKEY User Guide - Page 33

Performing Access Control Card Functions (cont'd) ↓ VISTA Card ID Number 001 ACS Event? Never Invoke 00 Enter two digits from the list below for the access point-related event desired. Acceptable entries have the following meanings: 00 = never invoke 02= access request 03 = egress request 04 = any request 05 = access grant 06 = egress grant 07 = any grant 08 = access denied 09 = egress denied 10 = any denial Press [*] to accept the entry. NOTES: • If you selected 00 "never invoke," the system advances to the "Block Entry" prompt. • For the ACS Event to occur, the card must be swiped at the access point defined in the following prompt. ↓ VISTA Card ID Number 001 Access Point? (01-15) 00 Enter 1 through 15 for the access point number corresponding to the event defined above. Press [*] to accept the entry. ↓ VISTA Card ID Number 001 ACTION? None 00 Enter the two-digit Action Number defining the action desired. For acceptable entries and their meanings see Table 1: Action Codes. NOTES: • For the Action to occur, the ACS Event (defined above) must have been invoked by a card swipe at the access point defined in the above prompt. • Actions that arm or disarm a partition will only be performed if the VISTA User number - 33 -