Honeywell VISTAKEY User Guide - Page 21

Performing Access Control Card Functions (cont'd) ↓ VISTA Card ID Number 001 Trace? NOT ENABLED 0 The Trace feature allows the cardholder to be monitored by logging his entry/exit grants and denials in the log and (if programmed) dialing out and sending a report to central station. Note that a card may also inherit a trace enable from its access group assignment. A card is traced if any access group that it is assigned to has trace enabled. NOTE: If a card has expired (from number of uses or date) and trace is enabled, any attempt to use the card will be logged and dial out (if enabled) as user U999. When a card expires, it remains in the database so that it may be reinstated if desired. Press 1 to trace the cardholder, or 0 for no trace. Press [*] to accept the entry. ACS GRP? 1 2 3 4 5 6 7 8 HIT 0-8 Each cardholder must belong to at least one access group. The access group provides the cardholder with certain privileges afforded to all cardholders that belong to that access group. If a cardholder belongs to more than one access group, he is afforded all the privileges of all the access groups he belongs to. The access groups also determine which access point(s) the cardholder has access to, and at what times, according to the schedule assigned for the access group. Press 0 to toggle all groups on or off; or press keys 1-8 to toggle the letter "x" under the group numbers on or off. Press [*] to accept the entry. - 21 -