Honeywell VISTAKEY User Guide - Page 36
Block Delete
View all Honeywell VISTAKEY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Performing Access Control Card Functions (cont'd) Block Delete Block Delete? 1=Yes 0=No Press 1 or 0. 0 If you press 1, the system advances to the next prompt. If you press 0, the system advances to the "Manual Delete?" prompt. Delete from Card 1-250 0=Quit Enter the 3-digit number corresponding to the 001 beginning (lowest) card number for the deletion. If you enter 000, the system advances to the "Quit Card Mode?" prompt. Press [*] to accept the entry. To Card 1-250 0=Quit Enter the 3-digit number corresponding to the 000 ending (highest) card number for the deletion. NOTE: If this number is not greater than the number entered as the "delete from" number above, no cards are deleted. Press [*] to accept the entry. Are you sure? 1=Yes 0=No Press 1 or 0. 0 If you press 1, the system marks the selected cards as deleted in the card database and returns to the "Delete from Card" prompt. If you press 0, the system returns to the "Delete from Card" prompt without marking any cards in the database for deletion. Press [*] to accept the entry. - 36 -