Huawei PORSCHE DESIGN WATCH GT 2 User Guide - Page 9

Getting started • If the battery level is critically low, the watch will vibrate and then automatically power off. Restarting the watch • When the watch is powered on, press and hold the Up button, and then touch Restart. • When the watch is powered on, from the home screen press the Up button, swipe until you find Settings, touch it, go to System > Restart, and then touch √ to confirm your choice. Force restarting the watch • Press and hold the Up button for at least 16 seconds to force restart the watch. Charging your watch Charging 1 Connect the USB Type-C port and power adapter and then plug in the power adapter. 2 Rest your watch on top of the charging cradle, ensuring that the contacts on your watch and the cradle are aligned. Wait until the charging icon appears on your watch screen. 3 When your watch is fully charged, 100% will be displayed on the watch screen and the charging will stop automatically. If the battery level is below 100% and the charger is still connected to the phone, the charging will start automatically. • Use the dedicated charging cable, charging cradle, rated output voltage of 5 V, and rated output current of 1 A or higher to charge your watch. • It is recommended that you lift the charging cradle to attach it to your watch. Ensure that the side of your watch with buttons is aligned with the charging port of the cradle. After the cradle and watch are connected properly, check to see if the charging icon is displayed. If you cannot see the charging icon, you may need to slightly adjust the position of the cradle until contact is established and the charging icon appears. • Your watch will automatically power off when its battery level is too low. your watch will automatically power on. Charging time Your watch will be fully charged within two hours. When the charging indicator displays 100%, the watch is fully charged. Disconnect your watch from the power adapter once it is fully charged. 7