IBM 6 Operation Guide - Page 8

Inserting Paper Paper Edge Indicator Paper Scale MY Ern d dr dr Olt Paper Release Lever Pipet Bail Load Lever (Closed Position) (Open position) (Load Position) -3 C;r4 e:45 eir-Z Mk Moving Paper Micro Up, You have four keys to move your paper up or down in the typewriter: Paper Up, Paper Down. and Moro Down. 'Paper up Pape' Down miortr' up The typewriter has a paper bail load lever to assist you'In loading the paper semiautomatically. The lever has three positional: closed, open, and load. 1. Make sure the typewriter is turned on.' 2. Push the paper release lever all the Why to the back of the type- writer. 3. Align the center of the paper edge Indicator with the vertical line to the left of zero (0) on the paper scale. 4. Align the left edge of the paper with the vertical line In the center of the paper edge indicator. 5. Pull the paper bail load lever all the way forward tothe load posi- tion. When the paper begins to teed, let go of the paper bail load lever. • The paper feeds to the top margin position. O. Push the paper bail load lever all the way back until the paper ball holds the paper against the platen. Note: When inserting loose carbon coplo* (five maximum), pull the paper release lever forward. insert the copies, then push the lever all the way back. ro [miwn°1 Line Spice • Press Paper Up to move the paper up one-half line. • Press Paper Down to move the paper down one-half line. • Press Micro Up to move the paper up 1148 of an inch. • Press Micro Down to move the paper down 1/45 of an Inch. Removing Paper 1. Pull the paper bail load lever toward you. 2, Pull the paper release lever toward you. 3. Remove the paper. 4. Push the paper release lever back. 5. Push the paper bail load lever back. Note: You may also press and hold down the Paper Up key or pul€ the paper bail load lever forward several times to remove paper. 1.4 Operator's Guide Basic Operations 14