IBM 6 Operation Guide - Page 82

Typing Problems Line Spacing Aligns Incorrectly 1. Look for objects inside the typewriter. 2. Look at the number of carbon copies being used (five maximum). 3. Make sure the paper release lever is pushed all the way back. Paper Feeds Incorrectly 1. Check the number of carbon copies being used (five maximum). 2. When inserting loose carbon copies, pull the paper release lever forward. Insert the copies, then push the lever all the way back. 3. Look for labels or paper caught under the platen. 4. Make sure the paper release lever is pushed all the way back. 5. Make sure the platen is latched down at both ends. • Pull the paper release lever all the wily toward you. • Push down firmly on each end of the platen. Then push the paper release lever all the way back. Wrong Characters Print or Characters Space Incorrectly,. 1. Turn the typewriter off, wait 30 seconds, then turn the typewriter on again. 2. Try typing again. 3. Make sure the Language light is off. 4. Try a new printwheel. 5. Look for objects in the path of the carrier. Wrong Character Spacing or Breaks in Underline If you are playing back from storage, make sure you use the same pitch printwheel you used when you stored the lob. 54 Operator's Guide Reference Use this chapter to learn how to: • Order IBM supplies for the typewriter. • Remove and install the ribbon and printwheel in the typewriter. • Change batteries. • Take care of your typewriter. This chapter also contains recommendations for ribbons and printwheels for various applications. Ordering Procedures for IBM Supplies To order IBM supplies, contact an IBM Authorized Dealer or call IBM Direct at 1-800-IBM-2468. In Canada. call IBM Direct at 1-800-465-1234. Typestyle Samples The IBM Cartridge Printwheel II is designed for use with IBM Wheelwriter® Typewriters and IBM Wheelprintera. The protective cartridge makes installation easy and protects the printwheel from damage. The wide variety of typestyles and sizes allows you to select one for readability, emphasis, or space requirements to make your work look the way you want. The order number listed is for the American Standard Character Sat. Personal computer, foreign language, and symbol character sets are also available. • = 10 pitch = 12 pitch ■ = 15 pitch = proportional spacing Note: Because of the difference between printed and typewritten Impressions, the typestyle samples on the following pages should be used only as a guide. Reference 7-1