IBM 68666AU User Guide - Page 91
Installing a drive in bay 1
![]() |
View all IBM 68666AU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Installing a drive in bay 1 Before you begin For information on installing SCSI drives, see the SCSI information provided on the Software Selections CD that comes with your computer. Read "Preparing to install options" on page 57. Turn off the computer and all other attached devices. Disconnect all external cables and power cords, and then remove the computer cover and front bezel(see "Removing the cover and front bezel" on page 59). Read the documentation that comes with the drive. Note: To install a 3.5-inch drive into drive bay 1, you need an industry standard bay adapter bracket. To install a drive in bay 1: 1. Touch the static-protective package containing the new drive to any unpainted metal surface and then remove the drive. 2. Remove the EMC shield covering bay 1 and insert the drive into the unoccupied drive bay. Then insert and tighten the screws to hold it in place. Chapter 5. Installing options 75
![](/manual_guide/products/ibm-68666au-user-guide-ea9d9ca/91.png)