IBM 86625RY Hardware Maintenance Manual - Page 127

State Soft Event Hard Event Misc Event Parity Event PFA Event The current state (see "Physical drive state descriptions" on page 83 and "Logical drive state descriptions" on page 82 more information). The number of soft events reported from the device event log. The number of hard events reported from the device event log. The number of miscellaneous events reported from the device event log. The number of parity events reported from the device event log. Yes - device indicates predictive failure analysis event. No - device does not indicate predictive failure analysis error. ServeRAID IPSSEND program (starting) You can run the IPSSEND program from the operating system command line. To start the IPSSEND program: If you are using OS/2 or Windows NT: 1. Type: c:\ipsadm\ipssend 2. Press Enter. Note The c represents the drive where OS/2 or Windows NT is installed. If you are using NetWare: 1. From the console, type: load ipssend 2. Press Enter. If you are using DOS: 1. Insert the bootable IPSSEND diskette that you created into diskette drive A; then, type: a:\ipssend 2. Press Enter. If you are using OpenServer or UnixWare: 1. Type: /usr/bin/ipssend 2. Press Enter. ServeRAID IPSSEND program (using) When you run the IPSSEND program with no command-line parameters, a list of available functions and their specific parameters appears. All functions require a minimum set of parameters to run the command. If you run the IPSSEND program with a specific function but Netfinity 5500 M20 - Type 8662 119