IBM 86625RY Hardware Maintenance Manual - Page 147

4. Insert the IBM ServeRAID Device Driver Diskette into the diskette drive. 5. Select Driver options from the Installation Options list. 6. Select Configure disk and storage from the Driver Options pop-up window. 7. Select Select an additional driver from the Additional Drivers Actions pop-up window. 8. When the next screen appears, press the Ins key to install an unlisted driver. 9. When the next screen appears, press the F3 key to specify a different path. 10. In the Specify a directory path field, type: a:\netware 11. When prompted to select a driver to install, select IPSRAID.HAM. 12. Select Yes when prompted to copy the IPSRAID.HAM driver. 13. When the prompt appears to specify the server boot path, type: c:\nwserver Notes 1. This instruction assumes that you installed NetWare in its default directory. If you did not install NetWare in the NWSERVER directory on drive C, modify step 13 accordingly. 2. If any of the files you are installing already exist on the server, NetWare will prompt you to save the older files. Although it is not necessary to save the older files, it usually is a good idea. 14. After the installation program copies all files, you can edit parameters (such as the ServeRAID slot number) from the Driver IPSRAID Parameter Actions screen. 15. After you edit the parameters, select Save Parameters and load driver to load the ServeRAID device driver. 16. Press Esc to exit the installation screens. Note If you want NetWare to load the ServeRAID device driver automatically during startup, you must add the appropriate LOAD command (for example, load ipsraid.ham slot=1) to the NetWare startup command file (usually C:\NWSERVER\STARTUP.NCF). Netfinity 5500 M20 - Type 8662 139