IBM 86625RY Hardware Maintenance Manual - Page 226

3 Slide rails 4 Screws for slide rails 5 Drive 5 Drive 6 SCSI cable for the removable-media drive bays 7 Shuttle 8 Thumbscrews To install a removable-media drive in one of the left front bays: 1. Turn off the server and peripheral devices (see "Preparing to install options" on page 246) and remove the top cover (see "Top cover removal" on page 284). 2. Remove the NetBAY3 bezel and the media-bay trim bezel. (See "Server door and trim bezels removal" on page 276.) 3. Remove the screws 1 and filler panel 2 from the bay opening. Save screws for later use in this procedure. You do not need the filler panel when you have a drive installed in the bay. 4. Touch the static-protective bag containing the drive to any unpainted metal surface on the server; then, remove the drive from the bag and place it on a static-protective surface. 5. Set any jumpers or switches on the drive according to the documentation that comes with the drive. 6. Use screws 4 of the appropriate size and length to attach a slide rail 3 to each side of the drive 5 . Note The slide rails and screws are included in the drive accessory kit that comes with the server. 218 Netfinity Server HMM