IBM 86625RY Hardware Maintenance Manual - Page 159

Installing the files after installing UnixWare: Use the following instructions to install the ServeRAID files after you install UnixWare, or use these instructions to update a previously installed ServeRAID file with a newer version. You can use the UnixWare Pkgadd or the UnixWare SCOAdmin utility program to install the files. Installing an HBA diskette file using Pkgadd 1. Use the ServerGuide Diskette Factory to create an IBM ServeRAID Device Drivers for SCO Operating Systems Diskette. 2. Insert the IBM ServeRAID Device Drivers for SCO Operating Systems Diskette into the diskette drive. 3. Type: pkgadd -d/ dev/dsk/f t 4. Press Enter 5. When the message Insert diskette into Floppy Drive 1 appears, press Enter. 6. When the message Installation of IBM ServeRAID SCSI IHV HBA (ips) was successful appears, type: q 7. Press Enter; then after the device driver installs, restart the system. Installing an HBA diskette file using SCOAdmin 1. Use the ServerGuide Diskette Factory to create an IBM ServeRAID Device Drivers for SCO Operating Systems Diskette. 2. Insert the IBM ServeRAID Device Drivers for SCO Operating Systems Diskette into the diskette drive. 3. Start the SCOAdmin utility program. 4. Select Software_Management. 5. Select Application Installer. 6. Select Disk_A from the Install From tab. 7. Select the Update View button. 8. When the icon labeled ips appears in the window, select Install. 9. After the device driver installs, restart the system. Starting the ServeRAID background-server components To start the background-server components: If you are using OS/2 or Windows, select the IPSRAID ADMIN-MONITOR icon on the desktop. If you are using OpenServer or UnixWare: 1. Make sure you are logged on as root. a. If you are not, type: su b. When prompted, enter the root password. 2. Start the background-server component (daemon) running in the background. To do this, type: Netfinity 5500 M20 - Type 8662 151