IBM 86625RY Hardware Maintenance Manual - Page 145
Installing the files after installing NetWare 3.12, IBM ServeRAID Device, Driver Diskette
UPC - 087944501855
View all IBM 86625RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Note The a represents the drive assignment for the diskette drive that contains the ServeRAID diskette. 6. Press Enter. Then, type: cd netware 7. Press Enter. Then, type: install 8. Press Enter. Then, follow the instructions that appear on the screen to complete the ServeRAID device driver and program installation. Installing the files after installing NetWare 3.12: The ServeRAID device driver for NetWare, IPSRAID.HAM, is in the NetWare directory on the IBM ServeRAID Device Driver Diskette. You can use the INSTALL.BAT file, which is also in the NetWare directory on the diskette, to copy all of the required files to the server directory. The INSTALL.BAT file will modify the STARTUP.NCF file so that it will load the required NetWare modules. Use the instructions provided in the NetWare 3.12 manual along with the following instructions to install the ServeRAID device driver, background-server component, and Administration and Monitoring Program files after installing NetWare, Version 3.12. 1. Use the ServerGuide Diskette Factory to create an IBM ServeRAID Device Driver Diskette. 2. Insert the IBM ServeRAID Device Driver Diskette into the diskette drive. 3. Go to the default NetWare 3.12 directory. To do this, type: cd\server.312 Note The SERVER.312 is the default NetWare 3.12 directory. If you are using a different path, be sure to specify the same path throughout the installation process. 4. Press Enter; then, from the operating system prompt in the SERVER.312 directory, type: a: Note The a represents the drive assignment for the diskette drive that contains the ServeRAID diskette. 5. Press Enter. Then, type: cd netware Netfinity 5500 M20 - Type 8662 137