IBM 86625RY Hardware Maintenance Manual - Page 153
Installing the files for OpenServer 5.0.0, Adding BTLD after the initial installation
UPC - 087944501855
View all IBM 86625RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
6. Keep the IBM ServeRAID Device Drivers for SCO Operating Systems Diskette readily available. You will need it to configure the device driver into the link kit. For additional information about adding a BTLD at boot time, refer to "Using Boot-Time Loadable Drivers" in the SCO OpenServer Handbook. Adding BTLD after the initial installation 1. Use the ServerGuide Diskette Factory to create an IBM ServeRAID Device Drivers for SCO Operating Systems Diskette. 2. Start the server in system maintenance mode, and log in as root. 3. Type: installpkg 4. Press Enter; then, select the diskette drive in which you will insert the installation diskette. 5. Insert the IBM ServeRAID Device Drivers for SCO Operating Systems Diskette, when prompted. 6. When prompted for the name of the package, type: ipsraid 7. Press Enter; then, relink the kernel (as described in "Relinking the kernel" in the SCO OpenServer Handbook) by entering the following commands: cd /etc/conf/cf.d ./link_unix 8. After the kernel rebuilds, the following message appears: The UNIX® kernel has been rebuilt. Do you want this kernel to boot by default? To continue, enter: y The system backs up the old kernel by moving /UNIX to /UNIX.OLD. 9. When the system asks for the kernel environment to be rebuilt, enter: y The system will respond with a successful message. 10. Use shutdown to bring down the system; then, restart the system. Using an IDE CD-ROM drive to install OpenServer files: This section contains instructions for installing files for OpenServer 5.0.0, OpenServer 5.0.2, and OpenServer 5.0.4 when using an IDE CD-ROM Drive. Installing the files for OpenServer 5.0.0: To install files for OpenServer 5.0.0 using an IDE CD-ROM drive: 1. Type the following at the BOOT prompt: restart ahslink="ATAPI ipsraid" Srom=wd( , , , ) Netfinity 5500 M20 - Type 8662 145