IBM 86625RY Hardware Maintenance Manual - Page 144

a:\nt 10. Select Continue; then after the device driver installs, restart the system. Installing ServeRAID device drivers for NetWare: This section provides instructions for installing the ServeRAID device drivers while installing NetWare 3.12 or 4.1X, and instructions for installing the ServeRAID device drivers if NetWare 3.12 or 4.1X already is installed. The Administration and Monitoring Program files and the background-server components for NetWare install automatically when you use the instructions in this chapter to install the ServeRAID device drivers for NetWare. Installing the files while installing NetWare 3.12: The ServeRAID device driver for NetWare, IPSRAID.HAM, is in the NetWare directory on the IBM ServeRAID Device Driver Diskette. You can use the INSTALL.BAT file, which is also in the NetWare directory on the diskette, to copy all required files to the server directory. The INSTALL.BAT file will modify the STARTUP.NCF file so that it will load the required NetWare modules. Use the instructions provided in the NetWare 3.12 manual along with the following instructions to install the ServeRAID device driver, background-server component, and Administration and Monitoring Program files while installing NetWare, Version 3.12. 1. Use the ServerGuide Diskette Factory to create an IBM ServeRAID Device Driver Diskette. 2. After you create the diskette, type the following at the command prompt to manually create the directory for NetWare: md server.312 Note The SERVER.312 is the default NetWare 3.12 directory. If you are using a different path, be sure to specify the same path throughout the entire NetWare installation process. 3. Press Enter. 4. Change to the SERVER.312 directory on the hard disk; then, insert the IBM ServeRAID Device Driver Diskette into the diskette drive. 5. At the operating system prompt, type: a: 136 Netfinity Server HMM