IBM 86625RY Hardware Maintenance Manual - Page 313
Error Code/Symptom, Configuration/Setup
UPC - 087944501855
View all IBM 86625RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 313 highlights
Error Code/Symptom 177, 178 (Security hardware error) 184 (Power-on password corrupted) 185 (Drive startup sequence information corrupted) 186 (Security hardware control logic failed) 187 (VPD serial number not set.) 188 (Bad EEPROM CRC #2) 189 (An attempt was made to access the server with invalid passwords) 201 (Memory test error, see "Memory settings" on page 30) If the server does not have the latest level of BIOS installed, update the BIOS to the latest level and run the diagnostic program again. 229 (Cache error) 262 (DRAM parity configuration error) 289 (DIMM has been disabled the user or system, see "Memory settings" on page 30) 301 (Keyboard or keyboard controller error) 303 (Keyboard controller error) FRU/Action 1. Run Configuration/Setup 2. System Board 1. Run Configuration/Setup 2. System Board 1. Run Configuration/Setup 2. System Board 1. Run Configuration/Setup 2. System Board 1. Set serial number in Setup 2. System Board 1. Run Configuration/Setup 2. System Board 1. Run Configuration/Setup, enter the administrator password 1. DIMM 2. Processor Board 3. System Board 1. Processor 2. Optional Processor (if installed) 3. Processor Board 1. Run Configuration/Setup 2. Battery 3. System Board 1. Run Configuration/Setup, if disabled by user 2. Disabled DIMM, if not disabled by user. 3. Processor Board 1. Keyboard 2. System Board 1. Keyboard 2. System Board Netfinity 5500 M20 - Type 8662 305