IBM 86625RY Hardware Maintenance Manual - Page 132
ServeRAID problem-isolation and debug, commands, Controller DriveNum, Controller, DriveNum
UPC - 087944501855
View all IBM 86625RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
UNBLOCK device states" on page 112 for more information.) Use the UNBLOCK command to gain access to a blocked logical drive. RAID level-0 logical drives become blocked if they are in an array that contains RAID level-1 or level-5 logical drives and the array is being rebuilt. Because the RAID level-0 logical drives cannot be rebuilt, the data stored on the RAID level-0 logical drives is damaged and should not be accessed. After you issue the UNBLOCK command, you must re-create or restore the data previously stored on the RAID level-0 logical drives. Supported operating systems: Windows NT, OS/2, NetWare, OpenServer, UnixWare, and DOS Command: IPSSEND UNBLOCK Controller DriveNum Replace: Controller with the ServeRAID controller number (1 to 8) DriveNum with the logical drive number (0 to 7) ServeRAID problem-isolation and debug commands: The IPSSEND problem-isolation and debug commands include the following: CERTIFY Use the CERTIFY command to verify the media of a hard disk drive. If the program finds a media error, it reassigns the sectors. A summary of reassignments and PFA errors appears upon completion of the verification. Supported operating system: DOS Command: IPSSEND CERTIFY Controller Channel SID Replace: Controller with the ServeRAID controller number (1 to 8) Channel with the channel number for the device (1, 2, or 3) SID with the SCSI ID for the device (0 to 15) ERASEEVENT Use the ERASEEVENT command to clear all logged entries in the designated event log. See GETEVENT help for information about the contents of the Device Event Log and the Adapter Soft and Hard Event Logs. 124 Netfinity Server HMM