IBM 86625RY Hardware Maintenance Manual - Page 150
The OS/2 Device Driver Installation window will, Notes, Enter, Install
UPC - 087944501855
View all IBM 86625RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Notes 1. The a represents the drive assignment for the diskette drive that contains the ServeRAID diskette. 2. If you install these files on a logical drive that has its write policy set to the write-back mode, wait at least 10 seconds after being prompted to press Ctrl+Alt+Del before you actually press the keys. Waiting 10 seconds or longer gives the ServeRAID adapter or controller the time needed to flush all dirty-cache pages out to the hard disk. 4. Press Enter. Then, type: ddinstal 5. Press Enter. The OS/2 Device Driver Installation window will appear and prompt you for the source and destination drives. The source directory shows where to insert the IBM ServeRAID Device Driver Diskette. The destination directory shows where the program will copy the device driver files. 6. Select Install. The program copies the following ServeRAID device driver statement to the CONFIG.SYS file: BASEDEV=IPSRAID.ADD The program copies the following ServeRAID device driver and program files to the OS/2 subdirectory on the hard disk: IPSRAID.ADD, IPSADM.EXE, and IPSRADM.EXE The program copies the following ServeRAID Help file to the \OS2\HELP directory: IPSRADM.HLP 7. Edit the CONFIG.SYS file and verify that there is only one copy of the line BASEDEV=IPSRAID.ADD. Notes 1. If you have more than one ServeRAID or SCSI adapter in the system, make sure that the BASEDEV statement for the adapter controlling the startup (boot) device appears before the BASEDEV statements for other ServeRAID or SCSI adapters in the CONFIG.SYS file. 2. After you install any service packs, check the path for the IPSRAID.ADD device driver and verify that the correct device driver is installed. 8. Restart the server. 142 Netfinity Server HMM