IBM 86802SY Hardware Maintenance Manual - Page 125

To add a power supply, open position, and slide the power supply into

Get IBM 86802SY - Netfinity 7000 M10 PDF manuals and user guides
UPC - 087944496816
View all IBM 86802SY manuals
Add to My Manuals
Save this manual to your list of manuals

Page 125 highlights

To add a power supply: Note It is not necessary to turn the Power switch on the power supply off when you are installing a hot-swap power supply. 1. Remove the filler panel 2 : a. Remove the screws 1 from the filler panel. b. Remove the filler panel from the power-supply bay and save it and the screws for future use. Note During normal operation, be sure that each power-supply bay has either a power supply or filler panel installed for proper cooling. 2. Remove any shipping screws from the power supply. Note You do not need to replace the shipping screws. 3. Place the handle 4 on the power supply 3 in the open position, and slide the power supply into the chassis. 4. Close the handle on the power supply to seat the power supply in the bay. 5. Make sure the Power switch on the power supply is in the On position. 6. Verify that the DC Power light and AC Power light on the power supply are lit, indicating that the power supply is operating correctly. Netfinity 7000-M10 - Type 8680 117

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
To add a power supply:
Note
It is not necessary to turn the Power switch on
the power supply off when you are installing a
hot-swap power supply.
1.
Remove the filler panel
±2²
:
a.
Remove the screws
±1²
from the filler panel.
b.
Remove the filler panel from the power-supply
bay and save it and the screws for future use.
Note
During normal operation, be sure that each
power-supply bay has either a power supply
or filler panel installed for proper cooling.
2.
Remove any shipping screws from the power supply.
Note
You do not need to replace the shipping screws.
3.
Place the handle
±4²
on the power supply
±3²
in the
open position, and slide the power supply into the
chassis.
4.
Close the handle on the power supply to seat the
power supply in the bay.
5.
Make sure the Power switch on the power supply is in
the On position.
6.
Verify that the DC Power light and AC Power light on
the power supply are lit, indicating that the power
supply is operating correctly.
Netfinity 7000-M10 - Type 8680
117