IBM 86802SY Hardware Maintenance Manual - Page 177
Shuttle Assembly Removal
![]() |
UPC - 087944496816
View all IBM 86802SY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Shuttle Assembly Removal Before you begin: Read "Safety Information" on page 226. To Remove the shuttle assembly, do the following: 1. Power-off the system. 2. Disconnect all power to the system. 3. Remove the top cover, see "Removing the Top Cover" on page 161. 4. Disconnect all I/O board cables. 5. Disconnect all cables attached to the adapters installed on the I/O board. 6. Remove all adapters installed on the I/O board. Netfinity 7000-M10 - Type 8680 169
![](/manual_guide/products/ibm-86803ru-hardware-maintenance-manual-dc70288/177.png)
Shuttle Assembly Removal
Before you begin:
Read “Safety Information” on page
226.
To Remove the shuttle assembly, do the following:
1.
Power-off the system.
2.
Disconnect all power to the system.
3.
Remove the top cover, see “Removing the Top
Cover” on page
161.
4.
Disconnect all I/O board cables.
5.
Disconnect all cables attached to the adapters
installed on the I/O board.
6.
Remove all adapters installed on the I/O board.
Netfinity 7000-M10 - Type 8680
169