IBM 86802SY Hardware Maintenance Manual - Page 207
I/O Board Cable, Fixed Disk Cables
![]() |
UPC - 087944496816
View all IBM 86802SY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
Error Code/Symptom 1600 (The System Management Card is not functioning) Do the following before replacing a FRU: Remove the AC power to the system, wait 20 seconds; then, re-connect the AC power. Wait 30 seconds; then, power-on the system. 1762 (Fixed Disk Configuration error) 178X (Fixed Disk error) 1962 (Drive does not contain a valid boot sector) 2400 (Video controller test failure) 2462 (Video memory configuration error) 5962 (IDE CD-ROM configuration error) 8603 (Pointing Device Error) 0001200 (Machine check architecture error) 000120PX (Processor cache error) 00019501 (Processor 1 is not functioning) FRU/Action 1. I/O Board Cable 2. System Management Card Cable 3. System Management Card 4. I/O Function Card 5. I/O Board 1. Fixed Disk Cables 2. Run Configuration/Setup 3. Fixed Disk Adapter 4. Fixed Disk Drive 5. I/O Function Card 1. Fixed Disk Cables 2. Run Diagnostics 3. Fixed Disk Adapter 4. Fixed Disk Drive 5. I/O Function Card 1. Verify a bootable operating system is installed 2. Run Diagnostics 3. Hard Disk Drive Cable 4. I/O Function Card 5. Hard Disk Drive 1. Video Adapter (if installed) 2. I/O Function Card 1. Video Adapter (if installed) 2. I/O Function Card 1. Run Configuration 2. CD-ROM Drive Cable 3. CD-ROM Drive 4. Battery, see "Battery" on page 89. 5. I/O Board 1. Pointing Device 2. I/O Function Card 1. BSP Processor 2. Processor Board 1. Processor X 2. Processor Board 1. VRM 1A/1B 2. Processor 1 3. Processor Board Netfinity 7000-M10 - Type 8680 199
![](/manual_guide/products/ibm-86803ru-hardware-maintenance-manual-dc70288/207.png)