IBM 86802SY Hardware Maintenance Manual - Page 90

System Reliability Considerations, Reinstall the Advanced System Management PCI

Get IBM 86802SY - Netfinity 7000 M10 PDF manuals and user guides
UPC - 087944496816
View all IBM 86802SY manuals
Add to My Manuals
Save this manual to your list of manuals

Page 90 highlights

8. Lock the PCMCIA connector by pushing the slide 4 forward as shown. 9. Locate and remove the external connector knockout on the back panel of the server. To remove the external connector knockout, use a flat blade screwdriver to carefully tap the bottom edge of the knockout panel. The knockout will bend toward the interior of the server. After the external connector knockout has bent in slightly, insert the tip of the screwdriver between the edge of the knockout and the back panel of the server and gently pry the knockout off. Attention Be careful not to bend the back panel of the server while removing the knockout. 10. Reinstall the Advanced System Management PCI Adapter. Be sure to reconnect any cables that you disconnected when removing the adapter from the server. 11. Insert the end of the token ring cable 3 into the external connector opening and secure it in place with the included screws. 12. Replace the server cover and reconnect the server to a power source. System Reliability Considerations To help ensure proper cooling and system reliability, make sure: Each of the drive bays has either a drive or a filler panel installed. 82 Netfinity Server HMM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
8.
Lock the PCMCIA connector by pushing the slide
±4²
forward as shown.
9.
Locate and remove the external connector knockout
on the back panel of the server.
To remove the external connector knockout, use a flat
blade screwdriver to carefully tap the bottom edge of
the knockout panel.
The knockout will bend toward
the interior of the server.
After the external connector
knockout has bent in slightly, insert the tip of the
screwdriver between the edge of the knockout and
the back panel of the server and gently pry the
knockout off.
Attention
Be careful not to bend the back panel of the
server while removing the knockout.
10.
Reinstall the Advanced System Management PCI
Adapter.
Be sure to reconnect any cables that you
disconnected when removing the adapter from the
server.
11.
Insert the end of the token ring cable
±3²
into the
external connector opening and secure it in place with
the included screws.
12.
Replace the server cover and reconnect the server to
a power source.
System Reliability Considerations
To help ensure proper cooling and system reliability, make
sure:
±
Each of the drive bays has either a drive or a filler
panel installed.
82
Netfinity Server HMM