IBM 86802SY Hardware Maintenance Manual - Page 81

Important For security purposes, change the username and password using the Advanced System Management service. For more information, see "Configuration Settings" on page 50. If you update the system management subsystem microcode, the default username (USERID) and password (PASSW0RD) are reset. If you had previously changed them, you will need to change them again. When you have logged in, you will be presented with the Netfinity Advanced System Management PCI Adapter menu system. For more information, see "Netfinity Advanced System Management PCI Adapter Menus" Netfinity Advanced System Management PCI Adapter Menus: When you have logged into the system management subsystem, the following main menu appears: 2 Monitors 3 Error Logs 4 System Management Adapter Configuration 5 System Services 6 System Power 7 Boot B Remote Terminal Status Y Disconnect Current Logon Z Start Remote Video To access a menu item, press the number or letter that corresponds to the information that you want to access (or, if you are using a web browser to access the Netfinity Advanced System Management PCI Adapter, click on the menu selection that corresponds to the information that you want to access). After you select a menu item, subsequent menus will offer more specific information that pertains to the selection you made from the main menu. To return to the main menu, press the Esc key. Note Selecting Y Disconnect Current Logon ends the current session and requires you to enter a new username and password before continuing. Selecting Read displays the last entry. Selecting Read Last steps backwards through the entries. Selecting Write executes the command. Netfinity 7000-M10 - Type 8680 73