IBM 86802SY Hardware Maintenance Manual - Page 84

Boot Menu Selections: You can use the selections available from the Boot menu to: Shut down the server operating system and then restart the server Restart the server immediately, without first performing an operating system shutdown Restart the system management subsystem To access these functions: 1. Use a terminal program, TELNET session, or web browser to establish a connection with the system management subsystem modem. 2. Log in to the system management subsystem. When you have established a connection with the system management subsystem, you will be prompted for a username and password. You must provide a username and password combination that has been previously configured for use with the system management subsystem. You can use one of two username and password combinations: The default username (USERID) and password (PASSW0RD) note The default username and password are case sensitive. You must use all caps, and the "0" in PASSW0RD, is the numeral zero. A username and password that you define using the Advanced System Management service and Netfinity Manager Important For security purposes, change the username and password using the Advanced System Management service. For more information see "Configuration Settings" on page 50. If you update the system management subsystem microcode, the default username (USERID) and password (PASSW0RD) are reset. If you had previously changed them, you will need to change them again. When you have logged into the system management subsystem, the following main menu appears: 2 Monitors 3 Error Logs 4 System Management Adapter Configuration 5 System Services 6 System Power 7 Boot B Remote Terminal Status Y Disconnect Current Logon Z Start Remote Video 76 Netfinity Server HMM