IBM 86802SY Hardware Maintenance Manual - Page 136
cable-management arm bracket, mounting rail, mm through
UPC - 087944496816
View all IBM 86802SY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
6. Push the slide-bracket assemblies to the outermost positions on the rack. 7. Tighten all screws to secure both slide-bracket assemblies. If you are using a torque screwdriver, use the following torque setting: 8-11 Nm (70.8-97.0 in/lbs). 8. Attach the cable-management arm to the rear of the rack: a. Position the cable-management arm bracket on the outside of the mounting rail. b. Insert two screws (M6 by 16 mm) through the cable-management arm bracket, mounting rail, and cage nuts. Tighten the screws. c. Position the server bracket on the cable-management arm. 128 Netfinity Server HMM
6.
Push the slide-bracket assemblies to the outermost
positions on the rack.
7.
Tighten all screws to secure both slide-bracket
assemblies.
If you are using a torque screwdriver,
use the following torque setting:
8–11 Nm (70.8–97.0 in/lbs).
8.
Attach the cable-management arm to the rear of the
rack:
a.
Position the cable-management arm bracket on
the outside of the mounting rail.
b.
Insert two screws (M6 by 16
mm) through the
cable-management arm bracket, mounting rail,
and cage nuts.
Tighten the screws.
c.
Position the server bracket on the
cable-management arm.
128
Netfinity Server HMM