IBM 86802SY Hardware Maintenance Manual - Page 211

SCSI LEDs, SCSI Error Codes, I/O Function card .

Get IBM 86802SY - Netfinity 7000 M10 PDF manuals and user guides
UPC - 087944496816
View all IBM 86802SY manuals
Add to My Manuals
Save this manual to your list of manuals

Page 211 highlights

SCSI LEDs Check the status LED. If on, do the following: 1. Check the internal SCSI cable. 2. Replace the failing hard disk drive. 3. Replace the SCSI backplane. 4. Replace the hard disk drive controller (PCI adapter or I/O Function card . SCSI Error Codes Error Code All SCSI Errors One or more of the following might be causing the problem: A failing SCSI device (adapter, hard drive, controller) An improper SCSI configuration or SCSI termination jumper setting Duplicate SCSI IDs in the same SCSI chain A missing or improperly installed SCSI terminator A defective SCSI terminator An improperly installed cable A defective cable FRU/Action 1. External SCSI devices must be powered-on before you power-on the server. 2. The cables for all external SCSI devices are connected correctly. 3. If you have attached an external SCSI device to the server, make sure the external SCSI termination is set to automatic. 4. The last device in each SCSI chain is terminated correctly. 5. The SCSI devices are configured correctly. Netfinity 7000-M10 - Type 8680 203

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
SCSI LEDs
Check the status LED.
If on, do the following:
1.
Check the internal SCSI cable.
2.
Replace the failing hard disk drive.
3.
Replace the SCSI backplane.
4.
Replace the hard disk drive controller (PCI adapter or
I/O Function card .
SCSI Error Codes
Error Code
FRU/Action
All SCSI Errors
One or more of the following
might be causing the
problem:
±
A failing SCSI device
(adapter, hard drive,
controller)
±
An improper SCSI
configuration or SCSI
termination jumper
setting
±
Duplicate SCSI IDs in
the same SCSI chain
±
A missing or improperly
installed SCSI
terminator
±
A defective SCSI
terminator
±
An improperly installed
cable
±
A defective cable
1.
External SCSI
devices must be
powered-on before
you power-on the
server.
2.
The cables for all
external SCSI devices
are connected
correctly.
3.
If you have attached
an external SCSI
device to the server,
make sure the external
SCSI termination is set
to automatic.
4.
The last device in each
SCSI chain is
terminated correctly.
5.
The SCSI devices are
configured correctly.
Netfinity 7000-M10 - Type 8680
203