IBM 86802SY Hardware Maintenance Manual - Page 83
Important, System Power, Current power Status, Power Configuration, Power On, Netfinity Manager
![]() |
UPC - 087944496816
View all IBM 86802SY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
prompted for a username and password. You must provide a username and password combination that has been previously configured for use with the system management subsystem. You can use one of two username and password combinations: The default username (USERID) and password (PASSW0RD) Note The default username and password are case sensitive. You must use all caps, and the "0" in PASSW0RD, is the numeral zero. A username and password that you define using the Advanced System Management service and Netfinity Manager Important For security purposes, change the username and password using the Advanced System Management service. For more information see "Configuration Settings" on page 50. If you update the system management subsystem microcode, the default username (USERID) and password (PASSW0RD) are reset. If you had previously changed them, you will need to change them again. When you have logged into the system management subsystem, the following main menu appears: 2 Monitors 3 Error Logs 4 System Management Adapter Configuration 5 System Services 6 System Power 7 Boot B Remote Terminal Status Y Disconnect Current Logon Z Start Remote Video 3. Select 6 System Power. The following System Power menu appears: 1 Current Power Status 2 Power Configuration 3 Power On 4 Power Off 4. Select a System Power menu item. Select 1 Current power Status for information about the current server power status. Select 2 Power Configuration for information about the server power configuration. Select 3 Power On to power the server on (if it is currently powered off). Select 4 Power Off to power the server off (if it is currently powered on). Netfinity 7000-M10 - Type 8680 75
![](/manual_guide/products/ibm-86803ru-hardware-maintenance-manual-dc70288/83.png)