IBM 887022X Maintenance Manual - Page 159

v Video port: Connect the signal cable for a monitor to this port. Important: When the Remote Supervisor Adapter II-EXA is installed in place of the Remote Supervisor Adapter, you must connect the monitor or console switch to this video port. The integrated video controller on the server is disabled for models with a Remote Supervisor Adapter II-EXA installed. v Power LED: This green LED comes on and stays on when you plug in the server. Remote Supervisor Adapter connectors and LEDs This group of connectors and LEDs on the back of the server are used for system-management information and control. External power Error LED ASM interconnect connector (amber) port Ethernet activity LED (green) Ethernet link LED (green) Power LED (green) Management port 10/100 Ethernet port Figure 101. Remote Supervisor Adapter connectors and LEDs v External power connector: You can connect an optional ac power adapter to this connector. v Error LED: This amber LED is lit when a system-management error has occurred. v ASM interconnect port: Connect signal cables for managing expansion-module resources to this port. v Ethernet activity LED: This green LED is lit when there is activity on the Ethernet LAN. v Ethernet link LED: This green LED is lit when the Ethernet link is active. v 10/100 Ethernet port: Connect Ethernet signal cables to this port. v Management port: Connect a serial cable to this port to enable system management through a modem, or connect a null modem cable to this port to enable system management through a workstation or laptop computer. v Power LED: This green LED comes on and stays lit when you plug in the server. Chapter 5. I/O connectors and indicators 149