IBM 887022X Maintenance Manual - Page 35
Using, Logic, Configuration, Utility, program, ServeRAID, Manager
![]() |
UPC - 000435151957
View all IBM 887022X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Using the LSI Logic Configuration Utility program Use the LSI Logic Configuration Utility program to: v Perform a low-level format of a SCSI hard disk drive v Set a SCSI device scan order Notes: 1. The integrated SCSI controller with RAID capabilities in the server supports only RAID level-1 and RAID level-1 Enhanced (RAID level-1E). Installing an optional ServeRAID controller provides additional RAID levels. See "Using ServeRAID Manager" for information about configuring the server for RAID operation. 2. If you install a different type of RAID adapter in the server, use the configuration method supplied with the RAID adapter to view or change SCSI settings for attached devices. Complete the following steps to start the LSI Logic Configuration Utility program: 1. Turn on the server. 2. When the prompt > appears, press Ctrl+C. If you have set an administrator password, you are prompted to type the password. 3. Use the arrow keys to select a controller (channel) from the list of adapters; then, press Enter. 4. Follow the instructions on the screen to change the settings of the selected items; then, press Enter. If you select Device Properties or Mirroring Properties, additional screens are displayed. Using ServeRAID Manager Use ServeRAID Manager, which is on the IBM ServeRAID Support CD, to: v Configure a redundant array of independent disks (RAID) v Restore a SCSI hard disk drive to the factory-default settings, erasing all data from the disk v View your RAID configuration and associated devices v Monitor the operation of your RAID controllers To perform some tasks, you can run ServeRAID Manager as an installed program. However, to configure the integrated SCSI controller with RAID capabilities and perform an initial RAID configuration on the server, you must run ServeRAID Manager in Startable CD mode, as described in the instructions in this section. If you install a different type of RAID adapter in the server, use the configuration method described in the instructions that come with that adapter to view or change SCSI settings for attached devices. See the ServeRAID documentation on the IBM ServeRAID Support CD for additional information about RAID technology and instructions for using ServeRAID Manager to configure your integrated SCSI controller with RAID capabilities. Additional information about ServeRAID Manager is also available from the Help menu. For information about a specific object in the ServeRAID Manager tree, select the object and click Actions > Hints and tips. Chapter 2. Configuration 25
![](/manual_guide/products/ibm-887022x-maintenance-manual-031fc62/35.png)